--- np2/lio/lio.c	2004/02/21 20:48:52	1.13
+++ np2/lio/lio.c	2005/02/07 14:46:12	1.20
@@ -7,20 +7,12 @@
 #include	"biosmem.h"
 #include	"vram.h"
 #include	"lio.h"
+#include	"lio.res"
 
 
 void lio_initialize(void) {
 
-	UINT	i;
-
-	mem[0xf9900] = 0x11;
-	for (i=0; i<0x11; i++) {
-		mem[0xf9904 + i*4] = 0xa0 + i;
-		mem[0xf9905 + i*4] = 0x00;
-		SETBIOSMEM16(0xf9906 + i*4, 0x100 + i*4);
-		SETBIOSMEM32(0xf9a00 + i*4, 0xcf90fb90);
-	}
-	mem[0xf9944] = 0xce;
+	CopyMemory(mem + (LIO_SEGMENT << 4), liorom, sizeof(liorom));
 }
 
 void bios_lio(REG8 cmd) {
@@ -29,9 +21,9 @@ void bios_lio(REG8 cmd) {
 	UINT8	ret;
 
 //	TRACEOUT(("lio command %.2x", cmd));
-	i286_memstr_read(CPU_DS, 0x0620, &lio.work, sizeof(lio.work));
-	lio.palmode = i286_membyte_read(CPU_DS, 0x0a08);
-	lio.wait = 500;
+	MEML_READSTR(CPU_DS, 0x0620, &lio.work, sizeof(lio.work));
+	lio.palmode = MEML_READ8(CPU_DS, 0x0a08);
+	lio.wait = 0;
 	switch(cmd) {
 		case 0x00:			// a0: GINIT
 			ret = lio_ginit(&lio);
@@ -65,8 +57,9 @@ void bios_lio(REG8 cmd) {
 			ret = lio_gline(&lio);
 			break;
 
-//		case 0x08:			// a8: GCIRCLE
-//			break;
+		case 0x08:			// a8: GCIRCLE
+			ret = lio_gcircle(&lio);
+			break;
 
 //		case 0x09:			// a9: GPAINT1
 //			break;
@@ -101,7 +94,9 @@ void bios_lio(REG8 cmd) {
 			break;
 	}
 	CPU_AH = ret;
-	gdcsub_setslavewait(lio.wait);
+	if (lio.wait) {
+		gdcsub_setslavewait(lio.wait);
+	}
 }
 
 
@@ -173,7 +168,7 @@ void lio_updatedraw(GLIO lio) {
 
 static void pixed8(const _GLIO *lio, UINT addr, REG8 bit, REG8 pal) {
 
-	BYTE	*ptr;
+	UINT8	*ptr;
 
 	addr = LOW15(addr);
 	vramupdate[addr] |= lio->draw.sbit;
@@ -220,7 +215,7 @@ static void pixed8(const _GLIO *lio, UIN
 void lio_pset(const _GLIO *lio, SINT16 x, SINT16 y, REG8 pal) {
 
 	UINT	addr;
-	BYTE	bit;
+	UINT8	bit;
 
 	if ((lio->draw.x1 > x) || (lio->draw.x2 < x) ||
 		(lio->draw.y1 > y) || (lio->draw.y2 < y)) {
@@ -235,10 +230,11 @@ void lio_pset(const _GLIO *lio, SINT16 x
 	pixed8(lio, addr, bit, pal);
 }
 
+#if 0
 void lio_line(const _GLIO *lio, SINT16 x1, SINT16 x2, SINT16 y, REG8 pal) {
 
 	UINT	addr;
-	BYTE	bit, dbit;
+	UINT8	bit, dbit;
 	SINT16	width;
 
 	if ((lio->draw.y1 > y) || (lio->draw.y2 < y)) {
@@ -284,12 +280,13 @@ void lio_line(const _GLIO *lio, SINT16 x
 		pixed8(lio, addr, dbit, pal);
 	}
 }
+#endif
 
 
 #if 0
 void lio_look(UINT vect) {
 
-	BYTE	work[16];
+	UINT8	work[16];
 
 	TRACEOUT(("lio command %.2x [%.4x:%.4x]", vect, CPU_CS, CPU_IP));
 	if (vect == 0xa7) {