--- np2/lio/lio.c	2004/03/04 17:36:06	1.15
+++ np2/lio/lio.c	2005/05/20 13:59:47	1.21
@@ -7,20 +7,12 @@
 #include	"biosmem.h"
 #include	"vram.h"
 #include	"lio.h"
+#include	"lio.res"
 
 
 void lio_initialize(void) {
 
-	UINT	i;
-
-	mem[0xf9900] = 0x11;
-	for (i=0; i<0x11; i++) {
-		mem[0xf9904 + i*4] = 0xa0 + i;
-		mem[0xf9905 + i*4] = 0x00;
-		SETBIOSMEM16(0xf9906 + i*4, 0x100 + i*4);
-		SETBIOSMEM32(0xf9a00 + i*4, 0xcf90fb90);
-	}
-	mem[0xf9944] = 0xce;
+	CopyMemory(mem + (LIO_SEGMENT << 4), liorom, sizeof(liorom));
 }
 
 void bios_lio(REG8 cmd) {
@@ -29,8 +21,8 @@ void bios_lio(REG8 cmd) {
 	UINT8	ret;
 
 //	TRACEOUT(("lio command %.2x", cmd));
-	MEML_READSTR(CPU_DS, 0x0620, &lio.work, sizeof(lio.work));
-	lio.palmode = i286_membyte_read(CPU_DS, 0x0a08);
+	MEMR_READS(CPU_DS, 0x0620, &lio.work, sizeof(lio.work));
+	lio.palmode = MEMR_READ8(CPU_DS, 0x0a08);
 	lio.wait = 0;
 	switch(cmd) {
 		case 0x00:			// a0: GINIT
@@ -65,8 +57,9 @@ void bios_lio(REG8 cmd) {
 			ret = lio_gline(&lio);
 			break;
 
-//		case 0x08:			// a8: GCIRCLE
-//			break;
+		case 0x08:			// a8: GCIRCLE
+			ret = lio_gcircle(&lio);
+			break;
 
 //		case 0x09:			// a9: GPAINT1
 //			break;
@@ -175,7 +168,7 @@ void lio_updatedraw(GLIO lio) {
 
 static void pixed8(const _GLIO *lio, UINT addr, REG8 bit, REG8 pal) {
 
-	BYTE	*ptr;
+	UINT8	*ptr;
 
 	addr = LOW15(addr);
 	vramupdate[addr] |= lio->draw.sbit;
@@ -222,7 +215,7 @@ static void pixed8(const _GLIO *lio, UIN
 void lio_pset(const _GLIO *lio, SINT16 x, SINT16 y, REG8 pal) {
 
 	UINT	addr;
-	BYTE	bit;
+	UINT8	bit;
 
 	if ((lio->draw.x1 > x) || (lio->draw.x2 < x) ||
 		(lio->draw.y1 > y) || (lio->draw.y2 < y)) {
@@ -241,7 +234,7 @@ void lio_pset(const _GLIO *lio, SINT16 x
 void lio_line(const _GLIO *lio, SINT16 x1, SINT16 x2, SINT16 y, REG8 pal) {
 
 	UINT	addr;
-	BYTE	bit, dbit;
+	UINT8	bit, dbit;
 	SINT16	width;
 
 	if ((lio->draw.y1 > y) || (lio->draw.y2 < y)) {
@@ -289,30 +282,3 @@ void lio_line(const _GLIO *lio, SINT16 x
 }
 #endif
 
-
-#if 0
-void lio_look(UINT vect) {
-
-	BYTE	work[16];
-
-	TRACEOUT(("lio command %.2x [%.4x:%.4x]", vect, CPU_CS, CPU_IP));
-	if (vect == 0xa7) {
-		i286_memstr_read(CPU_DS, CPU_BX, work, 16);
-		TRACEOUT(("LINE %d %d %d %d - %d %d / %d : %.2x %.2x",
-					LOADINTELWORD(work),
-					LOADINTELWORD(work+2),
-					LOADINTELWORD(work+4),
-					LOADINTELWORD(work+6),
-					work[8], work[9], work[10], work[11], work[12]));
-	}
-	else if (vect == 0xad) {
-		i286_memstr_read(CPU_DS, CPU_BX, work, 16);
-		TRACEOUT(("GPUT2 x=%d / y=%d / chr=%.4x / %d / %d %d %d",
-			LOADINTELWORD(work),
-			LOADINTELWORD(work+2),
-			LOADINTELWORD(work+4),
-			work[6], work[7], work[8], work[9]));
-	}
-}
-#endif
-