--- np2/pccore.c	2005/03/05 06:02:28	1.100
+++ np2/pccore.c	2007/11/03 00:00:18	1.107
@@ -104,62 +104,82 @@ const OEMCHAR	*p;
 
 // ----
 
-static void pccore_set(void) {
-
+static void pccore_set(const NP2CFG *pConfig)
+{
 	UINT8	model;
 	UINT32	multiple;
 	UINT8	extsize;
 
 	ZeroMemory(&pccore, sizeof(pccore));
 	model = PCMODEL_VX;
-	if (!milstr_cmp(np2cfg.model, str_VM)) {
+	if (!milstr_cmp(pConfig->model, str_VM)) {
 		model = PCMODEL_VM;
 	}
-	else if (!milstr_cmp(np2cfg.model, str_EPSON)) {
+	else if (!milstr_cmp(pConfig->model, str_EPSON)) {
 		model = PCMODEL_EPSON | PCMODEL_VM;
 	}
 	pccore.model = model;
 
-	if (np2cfg.baseclock >= ((PCBASECLOCK25 + PCBASECLOCK20) / 2)) {
+	if (np2cfg.baseclock >= ((PCBASECLOCK25 + PCBASECLOCK20) / 2))
+	{
 		pccore.baseclock = PCBASECLOCK25;			// 2.5MHz
 		pccore.cpumode = 0;
 	}
-	else {
+	else
+	{
 		pccore.baseclock = PCBASECLOCK20;			// 2.0MHz
 		pccore.cpumode = CPUMODE_8MHZ;
 	}
-	multiple = np2cfg.multiple;
-	if (multiple == 0) {
+	multiple = pConfig->multiple;
+	if (multiple == 0)
+	{
 		multiple = 1;
 	}
-	else if (multiple > 32) {
+	else if (multiple > 32)
+	{
 		multiple = 32;
 	}
 	pccore.multiple = multiple;
 	pccore.realclock = pccore.baseclock * multiple;
 
 	// HDDの接続 (I/Oの使用状態が変わるので..
-	if (np2cfg.dipsw[1] & 0x20) {
+	if (pConfig->dipsw[1] & 0x20)
+	{
 		pccore.hddif |= PCHDD_IDE;
+#if defined(SUPPORT_IDEIO)
+		sxsi_setdevtype(0x02, SXSIDEV_CDROM);
+#endif
+	}
+	else
+	{
+		sxsi_setdevtype(0x02, SXSIDEV_NC);
 	}
 
 	// 拡張メモリ
 	extsize = 0;
-	if (!(np2cfg.dipsw[2] & 0x80)) {
-		extsize = min(np2cfg.EXTMEM, 13);
+	if (!(pConfig->dipsw[2] & 0x80))
+	{
+		extsize = np2cfg.EXTMEM;
+#if defined(CPUCORE_IA32)
+		extsize = min(extsize, 63);
+#else
+		extsize = min(extsize, 13);
+#endif
 	}
 	pccore.extmem = extsize;
-	CopyMemory(pccore.dipsw, np2cfg.dipsw, 3);
+	CopyMemory(pccore.dipsw, pConfig->dipsw, 3);
 
 	// サウンドボードの接続
-	pccore.sound = np2cfg.SOUND_SW;
+	pccore.sound = pConfig->SOUND_SW;
 
 	// その他CBUSの接続
 	pccore.device = 0;
-	if (np2cfg.pc9861enable) {
+	if (pConfig->pc9861enable)
+	{
 		pccore.device |= PCCBUS_PC9861K;
 	}
-	if (np2cfg.mpuenable) {
+	if (pConfig->mpuenable)
+	{
 		pccore.device |= PCCBUS_MPU98;
 	}
 }
@@ -168,12 +188,13 @@ static void pccore_set(void) {
 // --------------------------------------------------------------------------
 
 #if !defined(DISABLE_SOUND)
-static void sound_init(void) {
-
+static void sound_init()
+{
 	UINT	rate;
 
 	rate = np2cfg.samplingrate;
-	if ((rate != 11025) && (rate != 22050) && (rate != 44100)) {
+	if ((rate != 11025) && (rate != 22050) && (rate != 44100))
+	{
 		rate = 0;
 	}
 	sound_create(rate, np2cfg.delayms);
@@ -225,7 +246,7 @@ void pccore_init(void) {
 	fddfile_initialize();
 
 #if !defined(DISABLE_SOUND)
-	sound_init();
+	sound_init(&np2cfg);
 #endif
 
 	rs232c_construct();
@@ -292,7 +313,7 @@ void pccore_reset(void) {
 	if (soundrenewal) {
 		soundrenewal = 0;
 		sound_term();
-		sound_init();
+		sound_init(&np2cfg);
 	}
 #endif
 	ZeroMemory(mem, 0x110000);
@@ -301,11 +322,12 @@ void pccore_reset(void) {
 	ZeroMemory(mem + FONT_ADRS, 0x08000);
 
 	//メモリスイッチ
-	for (i=0; i<8; i++) {
+	for (i=0; i<8; i++)
+	{
 		mem[0xa3fe2 + i*4] = np2cfg.memsw[i];
 	}
 
-	pccore_set();
+	pccore_set(&np2cfg);
 	nevent_allreset();
 
 	CPU_RESET();
@@ -320,7 +342,8 @@ void pccore_reset(void) {
 	}
 
 	// HDDセット
-	sxsihdd_allbind();
+	diskdrv_hddbind();
+	// SASI/IDEどっち？
 #if defined(SUPPORT_SASI)
 	if (sxsi_issasi()) {
 		pccore.hddif &= ~PCHDD_IDE;
@@ -343,11 +366,11 @@ void pccore_reset(void) {
 	fddfile_reset2dmode();
 	bios0x18_16(0x20, 0xe1);
 
-	iocore_reset();								// サウンドでpicを呼ぶので…
-	cbuscore_reset();
-	fmboard_reset(pccore.sound);
+	iocore_reset(&np2cfg);								// サウンドでpicを呼ぶので…
+	cbuscore_reset(&np2cfg);
+	fmboard_reset(&np2cfg, pccore.sound);
 
-	i286_memorymap((pccore.model & PCMODEL_EPSON)?1:0);
+	MEMM_ARCH((pccore.model & PCMODEL_EPSON)?1:0);
 	iocore_build();
 	iocore_bind();
 	cbuscore_bind();
@@ -374,6 +397,10 @@ void pccore_reset(void) {
 
 	timing_reset();
 	soundmng_play();
+
+#if 0 && defined(SUPPORT_IDEIO)	// Test!
+	sxsi_devopen(0x02, OEMTEXT("e:\\pn\\pn.iso"));
+#endif
 }
 
 static void drawscreen(void) {
@@ -548,6 +575,8 @@ void screenvsync(NEVENTITEM item) {
 
 // ---------------------------------------------------------------------------
 
+// #define SINGLESTEPONLY
+
 #if defined(TRACE)
 static int resetcnt = 0;
 static int execcnt = 0;
@@ -586,6 +615,7 @@ void pccore_exec(BOOL draw) {
 			CPU_RESETREQ = 0;
 			CPU_SHUT();
 		}
+#if !defined(SINGLESTEPONLY)
 		if (CPU_REMCLOCK > 0) {
 			if (!(CPU_TYPE & CPUTYPE_V30)) {
 				CPU_EXEC();
@@ -594,6 +624,11 @@ void pccore_exec(BOOL draw) {
 				CPU_EXECV30();
 			}
 		}
+#else
+		while(CPU_REMCLOCK > 0) {
+			CPU_STEPEXEC();
+		}
+#endif
 		nevent_progress();
 	}
 	artic_callback();